
Equipment
The Right Machine for Each Piece of the Job
Sawnee Land Clearing matches the machine to each piece of a job around Cumming and Forsyth County. A tracked drum mulcher handles brush and trees up to about 8 inches standing. Grinders, excavators, dozers, stump grinders and rotary cutters take the work a mulcher can't, each from a specialist crew.
- Drum mulchers
- Grinders and excavators
- Dozers for pads
- Silt fence crews

Machine classes on this page, not model numbers.
Whose machines
We pick the machine after we walk the land
The machines on your job belong to the specialist crews we hire for each piece: a mulching crew, an excavator operator, a grading crew, an erosion control crew.
That lets us send the machine that fits your trunk sizes, slope and finish, instead of the one machine a single operator happens to own.
- Machine chosen after the walk-through
- Each crew works to the same written scope
- One schedule across every machine
- One person to call about all of them
The machines
Eight classes of machine, and what each one is for
Most jobs around Cumming use two or three of these. A big tract with a homesite can use all of them.
01Track loader with a drum mulcher
The everyday machine. Grinds brush and trees up to about 8 inches where they stand and leaves the chips.
02Purpose-built mulching tractor
The same drum work with more power, for larger tracts where acres per day matter.
03Horizontal grinder
Turns piles, storm timber and stumps already on the ground into chips on site.
04Excavator with thumb or grapple
Pulls stumps, lifts big trunks and feeds the grinder. Takes hung storm trees apart from a distance.
05Dozer
Cuts building pads and driveways and spreads fill. Kept to cleared ground, away from the woods you keep.
06Stump grinder
Finish work. Grinds stumps below grade where you'll mow, plant or lay sod.
07Tractor with a rotary cutter
Maintenance mowing on cleared ground: grass, briars and soft sprouts before they harden into wood.
08Silt fence and exit tooling
Fabric, stakes and exit stone, put in before clearing starts on permitted sites.

The numbers
Four figures that decide which machine comes
Trunk size and the finish you need choose the machine more than acreage does.
What size trees a mulcher handles- 8 in
- Trunk size a drum mulcher takes standing; bigger trees get felled first
- 1 to 3 acres
- Light brush one mulcher clears in a day; dense hardwood runs under an acre
- 3 days
- Business days' notice Georgia 811 asks for before stump pulling or grading
- $100 to $400
- Per stump, ground below grade where you'll mow or plant
Ranges are estimates for Forsyth County and the surrounding area based on job density, terrain, access and acreage. Your written quote is the only price that applies to your property.

Soaked red clay ruts under any tracked machine. We wait it out.
Red clay and slope
Tracks, wet clay and the trees you keep
The mulchers, excavators and dozers on this page run on tracks, and the mulcher drives on the chip layer it lays down. On firm ground you see faint prints in the chips.
Saturated clay is different. The machine parks, and we move the date rather than leave furrows through your root zones.
- Route in picked on the walk, off the septic field
- Tracks kept out of keeper-tree root zones
- Steep slope worked only when dry
- Chips left on slopes to hold the clay
The honest part
Which machine you don't want on your land, and when
A dozer on a lot you want to keep green scrapes off the topsoil and packs the roots of the trees you meant to save. For open woods, send a mulcher and keep the ground covered.
A mulcher on a building pad is the opposite mistake. It grinds stumps flush, and stumps rot under a slab. Where concrete goes, the stumps come out with an excavator.
- Dozers off green lots
- Mulchers off building pads
- Rotary cutters off saplings
Match the machine
The job, the wrong machine, the right one
A single-machine outfit quotes the part of the job its machine can do. These are the mismatches that leave you paying twice.
Machine questions