
Horizontal grinding
Horizontal Grinding in Cumming and Forsyth County, Georgia
Sawnee Land Clearing grinds old push piles, storm timber, logs and stumps into chips across Cumming and Forsyth County. A horizontal grinder handles wood already on the ground; a forestry mulcher handles growth still standing. Grinding clears a pile in any month, including May 1 to September 30, when state rules ban land-clearing burns in Forsyth County.
- Push piles and storm timber
- Stumps and root balls
- No burn permit needed
- Chips spread on site
What we grind
Wood that's already on the ground
An excavator with a grapple feeds the grinder, and a conveyor throws the chips out the back. Four kinds of material come through it.
01Old push piles
Windrows a dozer left years ago, grown over with briars and vines. We pull them apart and grind them.
02Storm timber
Snapped and uprooted pines cut into lengths the grinder can take, with the tops and limbs fed in after.
03Stumps and root balls
Stumps pulled for a pad or a driveway. We shake the clay off first, because dirt and rock wear the teeth.
04Beetle-killed pine
Pine from a beetle spot that's too far gone to sell, cut and ground on site.

Standing brush goes to the mulcher. Piles go to the grinder.
Grinding or mulching
Grinding handles what's down. Mulching handles what's still growing.
A forestry mulcher drives across the land and grinds brush and small trees where they stand. It can't do much with a head-high pile of logs, stumps and dirt.
A horizontal grinder sits in one spot and takes whatever the excavator feeds it. Plenty of jobs need both: mulch the standing growth, then grind the piles an old clearing job left behind.
- Trunks too big for a mulcher head
- Piles mixed with stumps and roots
- Storm tangles across a driveway or trail
- Tops and limbs left after a timber harvest
How it runs
From a brush pile to a chip pile
Clean wood grinds fastest. Fresh storm timber goes quick; an old push pile packed with clay goes slower, because the excavator has to shake it out first.
- 1Day 0
Photos of the piles
Wide shots with a truck or a person for scale, and the route from the road.
- 2Site visit
Check the access
The grinder arrives on a lowboy trailer. We check the turn-in, gates, soft ground and overhead lines.
- 3Day 1
Set up
Grinder parked on firm ground, excavator beside it, conveyor aimed where you want the chips.
- 41 day and up
Shake and feed
The excavator knocks the dirt off each grab and keeps the grinder fed.
- 5Finish
Spread the chips
Chips spread over bare ground, piled for trails, or loaded out if you want them gone.
- 6Next spring
Plan for the bare spots
Old pile sites sprout briars and sweetgum first. A mowing pass keeps them down.
Mulched in place
What happens to the pile
A single-machine mulching outfit can't touch a big pile, and a dozer outfit usually burns it. Grinding turns it into ground cover where it sits.

Burn rules
Why piles sit unburned in Forsyth County
Burning land-clearing debris here runs into state and county rules and a short season. Grinding needs no burn permit and no calm, dry day.
Burn permits for land clearing in Georgia- May 1 to Sep 30
- No land-clearing burns in Forsyth County, air curtain burner or not
- Oct to Apr
- Outdoor burning season, with a county fire permit first
- 1,000 ft
- Gap a land-clearing burn must keep from occupied buildings
- 300 ft
- Gap between an air curtain burner and any occupied building or public road
Permit thresholds, fees and buffer widths are those published by Forsyth County and the State of Georgia as of November 4, 2026. Confirm current requirements with the issuing authority before work begins. This is not legal advice.
Cost
What grinding costs, and what moves it
We price grinding by the job after we see the piles. We have no published per-pile rate we'd stand behind, so the card shows the numbers grinding competes with.
Volume
Pile height, length and how tight it's packed decide the grinder hours.
Dirt and rock
Old push piles carry clay and stone. Shaking them clean takes excavator time.
Access
The grinder needs a firm route in and room to set up near the piles.
Where the chips go
Spread on site costs least. Loading them out adds trucking.
Ranges grinding is measured against
- Haul-off, added to clearing
- $500 to $2,500/acre
- Clear, grub and haul
- $3,500 to $8,000/acre
- Stump grinding in place
- $100 to $400 per stump
- Mulcher day with operator
- $1,800 to $3,000
Ranges are estimates for Forsyth County and the surrounding area based on job density, terrain, access and acreage. Your written quote is the only price that applies to your property.
Land clearing cost per acreWho it's for
Who calls us about a pile
Straight answers