Cumming, GA · Forsyth County and the 400 corridor

Mon–Sat 7am–6pm ET(470) 577-7981

Sawnee Land Clearing
Sawnee Land Clearing
Call (470) 577-7981 Get a free quote

Line clearing

Fence Line and Survey Line Clearing in Forsyth County, Georgia

Sawnee Land Clearing cuts survey lines, property lines and fence lines through brush and woods across Cumming and Forsyth County. A mulcher opens a sight line or a fence strip on the line the surveyor or owner flags, and stops there. Pins stay put, and the machine stops at Forsyth's 50-foot creek buffer and the Corps line.

  • Sight lines for surveyors
  • Fence strips cut to width
  • Cleared to the line
  • Pins left alone

Line clearing quote in one business day.

Short Quote

Have photos? The full quote form below takes them.

  • Mulched in placeNo burn piles, no haul-off.
  • One contractClearing, silt fence and grading together.
  • Permits handledErosion plan and county permit done for you.
  • Cost-share helpWe show you which Georgia program fits.

What's included

Lines cut for the crew that comes next

A survey line and a fence line are different widths for different crews. We cut the one you need, on the line you give us.

  • 01

    Survey sight lines

    A narrow lane between corners so the instrument can see from one point to the next.

  • 02

    Fence strips

    Wide enough for a post driver and a truck with wire, mulched flat so posts go in straight.

  • 03

    Privet-choked back lines

    The old line along the back of a lot, buried in privet and vines, opened so you can find it again.

  • 04

    Corners and pins kept

    We flag pins, monuments and witness trees before cutting and keep the machine off them.

  • 05

    Boundary trees kept

    Trees on the line and on the neighbor's side stay standing. The brush and saplings between them come out.

  • 06

    Ridges and wet draws

    Lines run straight over ridges and through draws. The mulch stays down so the clay holds on the slope.

Flag it or send the plat. We cut to that.

For surveyors

Send us the line. We'll have it open before your crew shows up.

A survey crew can't measure through privet and briars. Send us the plat, a flagged line or the points, plus the date your crew arrives.

We cut to that line, keep the machine off pins and witness trees, and send photos once it's open. Where the line meets a creek buffer or the Corps line, we stop.

  • Width agreed before the machine unloads
  • Your flags and pins left where they were
  • Photos when the line is open
  • Zoning buffers checked against the county tree ordinance

How it runs

From a flagged line to an open one

Line jobs are measured in feet, so the length and what grows on it set the schedule.

  1. 1Day 0

    Send the line

    Plat, flagged line, GPS points or the surveyor's sketch, plus the date you need it.

  2. 2Site visit

    Walk it

    We find the flags and pins, and any creek, old fence or Corps line on the route.

  3. 3Before work

    Agree the width

    Sight line or fence strip, and which trees on the line stay.

  4. 4By length

    Cut the line

    Mulcher down the line, chainsaw where trees crowd a pin or a corner.

  5. 5Finish

    Photos and handoff

    Photos to you or the surveyor, with a note on anything we found along the line.

We know the rules

Cleared to the line and not one foot past it

A line cut a few feet off can cost you a resurvey and a neighbor's goodwill. We work from the flags and check the buffers first.

Single-machine operatorSawnee Land Clearing
Where the line goesWhere the brush looks thinnestOn the surveyor's flags or plat
Pins and monumentsRun over or buried in mulchFlagged and kept clear
Neighbor's treesWhatever's in the wayLeft standing
Creek crossingsCut straight throughBuffer rules checked first
WidthOne machine widthSight line or fence strip, agreed
When it's doneA text saying finishedPhotos of the open line

Lines that run to Lake Lanier

The shoreline is federal land. We cut your line to the Corps boundary and stop there. Clearing for views or lawns on Corps land is not permitted.

Shoreline rules are set by the U.S. Army Corps of Engineers under the 2004 Shoreline Management Plan and were checked on November 4, 2026. A revision is in progress. Confirm with the Lake Lanier Shoreline Management Help Desk before any work near the government line.

Clearing near Lake Lanier

A cut line grows back

Sweetgum, privet and briars start closing a line the first spring. Mowing once or twice a year keeps a fence line open.

Bush hogging and mowing

Cost

What line clearing costs

Lines price by machine time more than by the acre. Length, width and growth set the hours, and short lines land on the minimum.

  • Length

    Feet of line, and how far it runs from where the trailer parks.

  • Width

    A sight line takes a fraction of the machine time a fence strip does.

  • What's on the line

    Briars and privet mulch fast. Old fence wire and big trunks slow the machine down.

  • Terrain

    Ridges, wet draws and creek crossings add hours, and sometimes a saw crew.

Estimated ranges around Cumming

Mulcher with operator
$150 to $300/hr
Machine day
$1,800 to $3,000
Small-job minimum
$1,200 to $2,000
Light brush, by the acre
$1,200 to $2,500/acre

Ranges are estimates for Forsyth County and the surrounding area based on job density, terrain, access and acreage. Your written quote is the only price that applies to your property.

Forestry mulching cost per hour

Free quote

Tell us about the land.

Tell us where the land is, what's growing on it and what you want it to be. Add a few photos if you have them. We'll call within one business day with what it takes and what it costs.

Call (470) 577-7981
  • No cost to quote
  • We walk the line before a final price
  • Out of state? Photo updates by text

Get your free quote

Three short steps. Photos help us price it right the first time.

Land Clearing Quote (3 steps)
  • Contact
  • The Job
  • Finish
Best number to reach you
A street address, or the closest intersection if the land has no address yet.
Map of Cumming, Georgia

Based in Cumming, Georgia. Serving Forsyth County and the 400 corridor.

Call (470) 577-7981 Get a quote